ERC-Mini DX

ERC-Mini DX
For a larger view click on the thumbnail
108,00 EUR
19 % VAT incl. excl. Shipping costs
Add to cart
Product no.: 9-0038


Products description

Distributor for USA & Canada: VIBROPLEX   

 

ERC-Mini DX was designed especially for the DXA/DXC-series rotators of Yaesu. It comes ready assembled and tested in an aluminium-enclosure and will be connected to the Yaesu-control-box by a Mini-DIN-cable.

ATTENTION: this product does not fit to the SDX-series of Yaesu/Kenpro. If you have one of those, please choose ERC-Mini SDX.

Included with the ERC-Mini DX:

  • Ready assembled and tested ERC-Mini DX with USB-interface in an aluminium-enclosure
  • Mini-DIN-cable for connection to the DXA/DXC-control-box
  • USB-cable.
  • Service-Tool (Windows XP/Vista/7/8/10/11 32 and 64bit) for configuration and calibration.
  • Rotor-Control Software (Windows XP/Vista/7/8/10/11 32 and 64bit)

SPECIFICATION ERC-Mini DX

  • Size of enclosure : 78mm x 40mm x 24mm
  • Supply-voltage : 5 VDC through USB, max 10mA
  • Operating-temperature : 0 to 70°
  • Measuring-circuit for the rotator-feedback-voltage : 0 to +6V, Input-Impedance > 25 KOhm.
  • Resolution : 10bit.
  • Software-driven calibration with calibration-assistant.
  • Full support for rotators with overlap up 180°
  • Security-stop, if the rotators doesn´t move
  • Outputs-circuits :
    • open-collector-outputs for CW, CCW
    • 4-stage speed-control with DAC
  • Communication-port: USB with FTDI-chipset. Baudrate configurable 4800-9600 Baud
  • Controller with bootloader.
  • ERC-Mini is compatible to a subset of the following protocols :
    • Hygain DCU-1 with extension for position-feedback
    • Yaesu GS232A
    • Yaesu GS232B
  • Programs with which ERC-Mini has been checked successfully : see Software-guide
  • Compatible rotators: Yaesu DXA/DXC-series G-800/1000/2800 DXA/DXC
  • Firmware supported features:
    • delay before rotator starts moving
    • programmable end-stops
    • antenna offset
    • support of overlap up to 180°
    • speed-function
    • tolerance of position
    • software-calibration
    • save and load of all calibration- and configuration-data
  • More details are available in the instructions in the File-section below.

RoHS : ERC-Mini and the components used are according to the EG-directive 2002/95/EG to avoid usage of hazardous substances in electronic equipment.


File

ERC-Mini Manual Download 5.07 MB

- only for information

- use the documentation that came with your product

This Product was added to our catalogue on 07/06/2015.

Overview   |   Product 2 of 7 in this category « first   |   « back   |   next »   |   last »
Quick purchase

Please enter the article no. from our catalogue.

Welcome back!
Last viewed:
Shipping country