No time in the contest or in the pile-up to put the antenne with the rotor-controller in the right position?
Working via satellite or with the ISS and manually adjusting the position of the antenna?
There is a transceiver in the remote-station, but no solution yet to operate the antenna remotely?
We have the solution for this!
Easy-Rotor-Control are interfaces between computers and rotor-controllers. They enable the antenna to be aligned at the touch of a button and provide computer-controlled tracking of rotators for moving objects in azimuth and elevation (SAT/EME, etc.). It doesn't matter whether the rotor has just come out of the store or is 50 years old. No matter which program you use for logging or running in the contest or tracking the satellites. We have a solution for almost every rotator and for almost every software.
Operating system Windows, Linux, MacOs? Interface RS232, USB or LAN? Your choice! ERC interfaces can be used in almost any station-setup.
Before ordering an ERC:
Please check our Rotator-list in order to be sure, that your rotator is compatible to our interfaces and if there is any accessory (connector or rotor-card) needed in order to set your system up.
The interface selection-guide will also help you in the decision, what interface to buy.
Please check also our Software-Guide in order to be sure that your favourite program is compatible to our interfaces and how to set it up.
Product-Overview
Azimuth-Interface ERC-Mini
Universal Azimuth-Interface ERC Version 4
ERC Version 4 USB KIT | ERC Version 4 RS232 KIT | ERC Version 4 SMD USB | |
![]() |
![]() |
![]() |
|
Deliveryform | Kit | Kit | assembled and tested |
Protocols | DCU-1, GS232A, GS232B | DCU-1, GS232A, GS232B | DCU-1, GS232A, GS232B |
Outputs | 2xDPDT, 1xSPST through terminal-clamps | 2xDPDT, 1xSPST through terminal-clamps | 2xDPDT, 1xSPST through terminal-clamps |
Interface | USB (FTDI) | RS232c | USB (FTDI) |
Supply | USB | DC 11..15V | USB |
Contents | mounting material USB-cable cables and cable-ties |
mounting material RS232-cable DC-connector cables and cable-ties |
mounting material USB-cable cables and cable-ties |
Optional | cables and connectors to control-box | cables and connectors to control-box | cables and connectors to control-box |
Rotators | all Rotators of the Azimuth-Rotator-List for ERC V4 | all Rotators of the Azimuth-Rotator-List for ERC V4 | all Rotators of the Azimuth-Rotator-List for ERC V4 |
Universal Azimuth/Elevation-Interface ERC-M
ERC-M USB KIT | ERC-M SMD | |
![]() |
![]() |
|
Deliveryform | Kit | assembled and tested |
Protocols | DCU-1, GS232A, GS232B, Dual AZ |
DCU-1, GS232A, GS232B, Dual AZ |
Outputs | 6x opencollector through D-SUB15 |
6x opencollector über D-SUB15 |
Interface | USB (FTDI) | USB (FTDI) RS232c (optional) |
Supply | USB oder DC 12..14V | USB oder DC 12..14V |
Contents | USB-cable DC-connector D-SUB15 connector |
USB-cable RS232-cable (optional) DC-connector D-SUB15 connector |
Optional | Slimline-Case Desktop-Housing Rotorcards LAN-Interface KCables and connectors to control-box |
KSlimline-Case Desktop-Housing Rotorcards LAN-Interface KCables and connectors to control-box |
Rotators | all Rotators of the Rotator-List for ERC-M | all Rotators of the Rotator-List for ERC-M |
Read what the press and the users say
Interface for Yaesu/Kenpro SDX-series, USB, open-collector-outputs, 4-stage speed-control
ERC-Mini SDX can be used to control rotators of the SDX-series by Yaesu/Kenpro. The interface was checked with the most popular logging-, contesting and remote-programs.
You can use ERC-Mini SDX to directly mount it inside the SDX-control-box.
1-axis interface for azimuth, RS232, relay-outputs
ERC is a compact interface which can be mounted directly into the control-box of most any rotator as it has the needed relays already on-board.
ERC can be used to control directional antennas for the HAM-operator. The controller has been checked with the most popular logging and contest-programs. Please refer to our software-guide.
1-axis interface for azimuth, USB, relay-outputs
ERC is a compact interface which can be mounted directly into the control-box of most any rotator as it has the needed relays already on-board.
ERC can be used to control directional antennas for the HAM-operator. The controller has been checked with the most popular logging and contest-programs. Please refer to our software-guide.
1-axis interface for azimuth, USB, relay-outputs
ERC is a compact interface which can be mounted directly into the control-box of most any rotator as it has the needed relays already on-board.
ERC can be used to control directional antennas for the HAM-operator. The controller has been checked with the most popular logging and contest-programs. Please refer to our software-guide.
1- or 2-axis interface, USB, open-collector-outputs, Azimuth, Azimuth&Elevation, DUAL-Azimuth
ERC-M can be used to control azimuth, azimuth&elevation or DUAL-azimuth antenna-systems for the HAM-operator. The controller was checked with the most popular logging or tracking-programs or with rotor-control-programs who communicate with such applications by DDE.
You can use ERC-M to directly connect the control-boxes that have a remote-connector or to (most) any other rotators (including homebrew-systems) by use of rotorcards. Any combination of rotators is valid.
1- or 2-axis interface, USB and RS232 (optional), open-collector-outputs, Azimuth, Azimuth&Elevation, DUAL-Azimuth
ERC-M can be used to control azimuth, azimuth&elevation or DUAL-azimuth antenna-systems for the HAM-operator. The controller was checked with the most popular logging or tracking-programs or with rotor-control-programs who communicate with such applications by DDE.
You can use ERC-M to directly connect the control-boxes that have a remote-connector or to (most) any other rotators (including homebrew-systems) by use of rotorcards. Any combination of rotators is valid.